Scroll to the bottom of the page to see my aftermarket exhaust and intake testing results
| 2023_zx4rr_compnent_weight_list.xlsx |
Watch the below video to take a look into the settings available with the woolich software that I will be using to develop my flashes for the ZX4RR.
The below video talks about how I break in my motorcycles
Below is the video of my baseline stock bike run , the bike made 55.36 hp/25.49 ft/lbs torque. Volume at idle was 62 db/ max volume during run was 110.6 db. Further down is a picture of the dyno run.
After a copule days on the dyno with the bike I made huge gains. Street riding portion of the tuning was next then I finished up again on the dyno.
The below video shows the results from my first road data logging session
The below video shows the results from my first road data logging session
The below video discusses the stock bike flash results to see the dyno results by itself scroll down past the video. New sound levels 62db @ idle 112 max db during dyno run
The below video shows the easy steps and products I used to track prep my ZX4R
Below is different testing results with aftermarket parts:
This is the testing I have done on my own bike, on my own dyno. I have flashes for all exhaust systems out, even if they are not listed below.
This is the testing I have done on my own bike, on my own dyno. I have flashes for all exhaust systems out, even if they are not listed below.
