2014-2018 FZ/FJ-09/XSR900 custom flash
The flash is $200
There are two options to get what you want from the flash.
1) Use the comments box on check out or send a note with your ecu. Include the modifications you have made to the bike, the type of riding you do most, and what your biggest goals from the flash are. I will send you a list of changes I made in the ecu.
2)Use the options form below to choose all the options you want with the flash. I do not send a list with the changes I made as I will make the changes you asked for.
If you do not have a good understanding of what each option is I recommend you use note type
Get the best flash available!! Our flash will transform your fz/fj/xsr into the bike YOU want!!
What separates our flash from the competition?? The fact that we will work with you to get your bike set up the way you want. Not what someone else decides for you!!
NO ONE will work harder to make you happy both before and after the flash.
return shipping fees are selected and payed for on checkout
Please send it delivery confirmation not signature. My mailbox is locked, if you send it signature confirmation it may delay shipping by one business day.
Lifetime reflashes are included in original purchase to original purchaser. Shipping fees still apply
O2 sensor disable is not available on the XSR
The 2017 FZ09 AIS disable is not available, but without the flash you will get a check engine light if you unplug the AIS from the main bike harness. With the flash you will not get a check engine light. This means if you want to install block off plates and remove the AIS system on a 2017 and up FZ09 and don't want a check engine light, you want the flash.
Features in the flash unless noted above are: ( features are explained in the questions section of the website)
Fuel Changes to match your modifications
Ignition timing for better throttle response and more power
Customizing all 3 throttle modes
Disabling the speed limiter
Disabling the AIS
Disabling injector decal cut
Option to start in A mode
Disable o2 sensor or closed loop fueling
lower fan temp activation
Decrease engine braking on initial roll off
Enabling a quick shifter (up shift only)
The flash has no effect on the factory quick shifter
I am excited to announce I have a new flash for the fz09/xsr900 and FJ09. The flash takes advantage of different software and offers additional option of a quick shifter, auto blipper ( up and down shifting) as well as launch control that can be set to whatever rpm you like. This is called race tools. The flash offers all the features of the $200 flash plus also allows me to disable the o2 sensor on the XSR and raise the rev limiter by 300 rpm on all bikes.
The flash itself is $250.
Race tools to activate the auto blipper the quick shifter and launch control is $500. It can not be purchase ala cart. Meaning it must be purchased as a full kit, you can not just have launch control for example . This includes a bi directional pressure sensor, all things to hook everything up and the license for me to activate it all in your ecu. You can even add a pitspeed limiter by adding an external switch.
full details can be seen here
note: I am making no additional money on the hardware( price is $480 plus shipping) but I have to order it so the license is added to my account and I can flash it into your ecu. Also note the active tune is not available with this flash.
6mm swingarms spools
Hard black anodized with quality stainless hardware. Nice lip so the stand doesn't slip off work to protect the swingarm in a crash also
FTECU Active tune
When ordered with the flash I will activate active tune and set it all up so you just have to install and enjoy
If ordered by itself you will get the kit mailed to you. Note: You still must flash your ecu
Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements.
The breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.
– Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
– Smog block-offs or disabled AIS valveThis kit includes:
– 1 FTECU YAM-01 Lambda Controller
– 1 Bosch LSU4.9 wideband O2 sensor
– 1 Product Activation Card
Currently available models
– 2017+ R6
– 2015+ R1M / R1 / R1s
– 2016+ FZ-10
– 2016+ MT-10
– 2014+ FZ-09
– 2014+ MT-09
– 2014+ FJ-09
– 2016+ XSR900
– 2015+ FZ-07
– 2015+ MT-07
Sprint Filter P08 FZ-09 / MT-09 (14-18) FJ-09 (15-18) XSR900 (16-18)
- Innovative polyester material allows for consistent airflow
- Optimized filter surface area provides more airflow, more power and more filtration
- Increased air permeability and filtration efficiency when compared to cotton air filters
- Race proven performance in organizations like MotoGP and Moto3
- Can be cleaned using only compressed air
- Dry filter, no oil treatments required
- Direct OEM replacement
- 1 year warranty
About Sprint Filter: Established in 1952, Sprint Filter started building high performance air filters and intake systems. Ever since their inception products have always been highly innovative and based on ongoing research and development of new filtering fabrics and intake systems.
Innovative Material: The Sprint Filter P08 has completely reinvented the concept of an aftermarket air filter. The innovative polyester material that is used allows the air to remain constant and calibrated unlike cotton or sponge materials that become inconsistent under pressure. A Sprint Filter is totally different from all others and its membrane filtering surface is double that of any other filter.
Race Proven Performance: Sprint Filter has been a part of World Championships in MotoGP, Moto3, Superbike, Supersport, and Superstock. The P08 filter is the first choice of championship contenders. Research and development is constantly carried out at the highest levels of racing in search of maximum filtration without compromising power.
Low Maintenance: The Sprint Filter P08 is essentially maintenance free. Remove the filter and blow it clean with compressed air and you’re ready to go. No messy oiling or washing required.
Long Lasting: If cared for properly, the Sprint Filter P08 will last for the entire time you own your bike.
Increased Fuel Economy: By optimizing the air/fuel mixture the Sprint Filter P08 allows you to consume less fuel all the while gaining more power!
Research and Development: We spend a tremendous amount of time and effort researching the best materials to use for the production of our air filters. The air filters are made with extreme precision to make sure you get the best air/fuel ratio for making power.
Efficient Filtration: The innovative polyester Sprint Filter P08 air filter stands apart from all other special cotton air filters for its increased air permeability along with its more efficient filtration and easy maintenance. The increase in air permeability and better performance in comparison with common cotton air filters is mainly due to two essential elements: the filtering material structure is made of polyester and the filter's folds are higher. These folds are what allow for the highest filtering surface on panel filters (20 mm) and work to the fullest advantage of air permeability and the quality of dirt filtration. Moreover, the total absence of oil to contain dirt allows for increased air entry with equal surface area. Furthermore, when considering that the filtering surface is very wide, an increase in airflow of approximately 25% is obtained in comparison with a cotton filter, working to the fullest advantage of the engines performance and the guaranteed protection of increased filtration.
Besides its increased air permeability, Sprint Filters P08 ensures extremely efficient filtration; as much as 80 microns, allowing to sieve out 93.13% of 100 micron particles versus the 76.42% of 100 micron particles trapped by cotton filters. This is made possible thanks to the special structure made of 5 micron diameter yarns which are woven together to leave room for a wide surface in which air passes freely.
- Yamaha FZ-09
- Yamaha MT-09
- Yamaha FJ-09
- Yamaha XSR900
OEM Part Number: 1RC-14451-00-00
FZ09 FJ09 XSR900 AIS block off plates
These plates are machined from solid thick billet aluminum, for positive sealing and have the Vcyclenut beasty logo machined directly into them. Then they are coated for a lifetime of worry free use.
Everything is included in the kit to remove the ais system and seal the air box
Install these plates if you want to get the least amount of popping on decal or are measuring your exhaust to obtain air fuel ratios
If you are not sure what the AIS system does please see the questions section of the website