2015-19 R1 Flash
The flash includes full fuel mapping with a fuel map developed while data logging and dyno tuning several of the latest flagships from Yamaha .
Air fuel modifications were done on the road and the dyno.
The flash includes four custom fly by wire maps. Power mode 1 being the most aggresive to 4 being the least. There is a throttle mode for every situation. All modes go to 100% throttle and make max power at full throttle.
The exup valve , o2 sensor and the air box valve are disabled.
upon checkout you will be emailed a receipt with full directions
Lifetime reflashes are included in original purchase to original purchaser. Shipping fees still apply.
Vcyclenut r1, r6, fz1, fz8, fz/mt 10, ais block off plates
All plate orders will come in pairs... two plates. Each order will also include an airbox cap, a zip-tie to help tidy up your intake area.
Used to seal the ports on the valve cover for the AIS (Air Injection System).
Eliminate the popping noise from aftermarket exhaust and baffle kits!
Most importantly, to get an accurate air/fuel mixture reading when tuning the bike.
Sprint P08 air filter Yamaha R1/ MT10
- Innovative polyester material allows for consistent airflow
- Optimized filter surface area provides more airflow, more power and more filtration
- Increased air permeability and filtration efficiency when compared to cotton air filters
- Race proven performance in organizations like MotoGP and Moto3
- Can be cleaned using only compressed air
- Dry filter, no oil treatments required
- Direct OEM replacement
- 1 year warranty
- See technical tab for additional fitment listing
About Sprint Filter: Established in 1952, Sprint Filter started building high performance air filters and intake systems. Ever since their inception products have always been highly innovative and based on ongoing research and development of new filtering fabrics and intake systems.
Innovative Material: The Sprint Filter P08 has completely reinvented the concept of an aftermarket air filter. The innovative polyester material that is used allows the air to remain constant and calibrated unlike cotton or sponge materials that become inconsistent under pressure. A Sprint Filter is totally different from all others and its membrane filtering surface is double that of any other filter.
Power Increase: The Sprint Filter P08 provides the absolute best performance on every bike we’ve tested. Testing done on the bench shows that the P08 provides the right amount of air in the most consistent manner we’ve tested. This is achieved by providing more air, more power, and more filtration than any factory OEM filter.
Race Proven Performance: Sprint Filter has been a part of World Championships in MotoGP, Moto3, Superbike, Supersport, and Superstock. The P08 filter is the first choice of championship contenders. Research and development is constantly carried out at the highest levels of racing in search of maximum filtration without compromising power.
Low Maintenance: The Sprint Filter P08 is essentially maintenance free. Remove the filter and blow it clean with compressed air and you’re ready to go. No messy oiling or washing required.
Long Lasting: If cared for properly, the Sprint Filter P08 will last for the entire time you own your bike.
Increased Fuel Economy: By optimizing the air/fuel mixture the Sprint Filter P08 allows you to consume less fuel all the while gaining more power!
Research and Development: We spend a tremendous amount of time and effort researching the best materials to use for the production of our air filters. The air filters are made with extreme precision to make sure you get the best air/fuel ratio for making power.
Efficient Filtration: The innovative polyester Sprint Filter P08 air filter stands apart from all other special cotton air filters for its increased air permeability along with its more efficient filtration and easy maintenance. The increase in air permeability and better performance in comparison with common cotton air filters is mainly due to two essential elements: the filtering material structure is made of polyester and the filter's folds are higher. These folds are what allow for the highest filtering surface on panel filters (20 mm) and work to the fullest advantage of air permeability and the quality of dirt filtration. Moreover, the total absence of oil to contain dirt allows for increased air entry with equal surface area. Furthermore, when considering that the filtering surface is very wide, an increase in airflow of approximately 25% is obtained in comparison with a cotton filter, working to the fullest advantage of the engines performance and the guaranteed protection of increased filtration.
Besides its increased air permeability, Sprint Filters P08 ensures extremely efficient filtration; as much as 80 microns, allowing to sieve out 93.13% of 100 micron particles versus the 76.42% of 100 micron particles trapped by cotton filters. This is made possible thanks to the special structure made of 5 micron diameter yarns which are woven together to leave room for a wide surface in which air passes freely.
FTECU Active tune
When ordered with the flash I will activate active tune and set it all up so you just have to install and enjoy
If ordered by itself you will get the kit mailed to you. Note: You still must flash your ecu
Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements.
The breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.
– Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
– Smog block-offs or disabled AIS valveThis kit includes:
– 1 FTECU YAM-01 Lambda Controller
– 1 Bosch LSU4.9 wideband O2 sensor
– 1 Product Activation Card
Currently available models
– 2017+ R6
– 2015+ R1M / R1 / R1s
– 2016+ FZ-10
– 2016+ MT-10
– 2014+ FZ-09
– 2014+ MT-09
– 2014+ FJ-09
– 2016+ XSR900
– 2015+ FZ-07
– 2015+ MT-07
Vcyclenut r1, r6, fz1, fz8, fz/mt 10, ais block off plates
All plate orders will come in pairs... two plates. Each order will also include an airbox cap, a zip-tie to help tidy up your intake area.
Used to seal the ports on the valve cover for the AIS (Air Injection System).
Eliminate the popping noise from aftermarket exhaust and baffle kits!
Most importantly, to get an accurate air/fuel mixture reading when tuning the bike.
Price includes shipping , choose the no shipping needed option on checkout
