2015-2020 FZ/MT 07/ XSR 700 ecu flash
Please choose options to suit your motorcycle in the contact form below then add item to cart and proceed to checkout.
Flashed by vcyclenut ,9800 health park circle unit 104, Fort Myers, FL, 33908.
Fuel changes to match your modifications
ignition timing for best power and throttle response
fan temps lowered
injector decal cut disabled
rev limiter raised ( if desired)
timing restrictions removed from lower gears
closed loop disabled ( woolich flash only)
This results in a smoother throttle with less engine braking and a more fun motorcycle to ride that is safely fueled for your modifications.
Lifetime reflashes are included in original purchase to original purchaser. Shipping fees still apply.
I have purchased my own MT07 and using woolich software have developed a whole new flash for the 07. The woolich software allows me access to disable the o2 sensor and finer control of the fueling then the FTECU software does. My FTECU flash is really good, as evident by my hundreds of happy 07 flash customers but my woolich flash takes it to a whole new level of refinement and smoothness. With the woolich flash you may get an idle that oscillates. The oscillation goes away as soon as you put any load on the engine and does not effect how the bike performs or the smoothness of the throttle in any way. If an idle that oscillates will bother you please stay with the FTECU flash but if you are ok with a couple hundred rpm idle oscillation and want the smoothest throttle possible get the woolich flash !
FTECU Active tune
When ordered with the flash I will activate active tune and set it all up so you just have to install and enjoy
If ordered by itself you will get the kit mailed to you. Note: You still must flash your ecu
Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements.
The breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.
– Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
– Smog block-offs or disabled AIS valveThis kit includes:
– 1 FTECU YAM-01 Lambda Controller
– 1 Bosch LSU4.9 wideband O2 sensor
– 1 Product Activation Card
Currently available models
– 2017+ R6
– 2015+ R1M / R1 / R1s
– 2016+ FZ-10
– 2016+ MT-10
– 2014+ FZ-09
– 2014+ MT-09
– 2014+ FJ-09
– 2016+ XSR900
– 2015+ FZ-07
– 2015+ MT-07
Yamaha MT/FZ07 Woodcraft frame sliders
There are several reasons why I exclusively use Woodcraft frame sliders on all my bike
1) The pucks use an outside mounting point. If you have ever tried to cut out the melted plastic from the hole to remove most frame sliders you know why this is an advantage.
2)They use nothing but top quality metals, so the frame sliders actually support the bike in a crash and don't break like I have seen many others do.
3) Woodcraft is an American company started by a group of guys that raced at the national level and saw a need for QUALITY reasonably priced components and filled that void
4) replacement parts are always easy to get
please put in the comments what type of puck you want when you check out.
Sprint Filter P08 FZ-07 / MT-07 (14- ) and Tracer/XSR700 (16- )
- Innovative polyester material allows for consistent airflow
- Optimized filter surface area provides more airflow, more power and more filtration
- Increased air permeability and filtration efficiency when compared to cotton air filters
- Race proven performance in organizations like MotoGP and Moto3
- Can be cleaned using only compressed air
- Dry filter, no oil treatments required
- Direct OEM replacement
- 1 year warranty
- See technical tab for additional fitment listing
About Sprint Filter: Established in 1952, Sprint Filter started building high performance air filters and intake systems. Ever since their inception products have always been highly innovative and based on ongoing research and development of new filtering fabrics and intake systems.
Innovative Material: The Sprint Filter P08 has completely reinvented the concept of an aftermarket air filter. The innovative polyester material that is used allows the air to remain constant and calibrated unlike cotton or sponge materials that become inconsistent under pressure. A Sprint Filter is totally different from all others and its membrane filtering surface is double that of any other filter.
Power Increase: The Sprint Filter P08 provides the absolute best performance on every bike we’ve tested. Testing done on the bench shows that the P08 provides the right amount of air in the most consistent manner we’ve tested. This is achieved by providing more air, more power, and more filtration than any factory OEM filter.
Race Proven Performance: Sprint Filter has been a part of World Championships in MotoGP, Moto3, Superbike, Supersport, and Superstock. The P08 filter is the first choice of championship contenders. Research and development is constantly carried out at the highest levels of racing in search of maximum filtration without compromising power.
Low Maintenance: The Sprint Filter P08 is essentially maintenance free. Remove the filter and blow it clean with compressed air and you’re ready to go. No messy oiling or washing required.
Long Lasting: If cared for properly, the Sprint Filter P08 will last for the entire time you own your bike.
Increased Fuel Economy: By optimizing the air/fuel mixture the Sprint Filter P08 allows you to consume less fuel all the while gaining more power!
Research and Development: We spend a tremendous amount of time and effort researching the best materials to use for the production of our air filters. The air filters are made with extreme precision to make sure you get the best air/fuel ratio for making power.
Efficient Filtration: The innovative polyester Sprint Filter P08 air filter stands apart from all other special cotton air filters for its increased air permeability along with its more efficient filtration and easy maintenance. The increase in air permeability and better performance in comparison with common cotton air filters is mainly due to two essential elements: the filtering material structure is made of polyester and the filter's folds are higher. These folds are what allow for the highest filtering surface on panel filters (20 mm) and work to the fullest advantage of air permeability and the quality of dirt filtration. Moreover, the total absence of oil to contain dirt allows for increased air entry with equal surface area. Furthermore, when considering that the filtering surface is very wide, an increase in airflow of approximately 25% is obtained in comparison with a cotton filter, working to the fullest advantage of the engines performance and the guaranteed protection of increased filtration.
Besides its increased air permeability, Sprint Filters P08 ensures extremely efficient filtration; as much as 80 microns, allowing to sieve out 93.13% of 100 micron particles versus the 76.42% of 100 micron particles trapped by cotton filters. This is made possible thanks to the special structure made of 5 micron diameter yarns which are woven together to leave room for a wide surface in which air passes freely.
- Yamaha MT-07 (2014 - >)
- Yamaha MT-07 Moto Cage (2014 - >)
- Yamaha FZ-07 (2015 - >)
- Yamaha XSR 700 (2016 - >)
OEM Part Number: 1WS-14450-00-00
Tail Tidy by Lextek
These tail tidy's from Lextek, like most of their products, provide great quality at an amazing price point
come with light for the license plate and removable brackets to mount aftermarket turn signals, adjustable for angle and height