FZ09/ FJ09/XSR900 quick shift kit
Please note due to changes in the software any flash performed after 2/19/18 or any XSR900 or 2017 FZ09 require the bikes side programming harness any ecu's flashed before that time being retrofitted with a quick shift kit need the tip over sensor harness
You are purchasing a quick shifter kit for an fz09 or FJ09. Combined with your flashed ECU this will allow smooth upshifts with out changing throttle position or engaging the clutch. As long as you are above 4000 rpms, just push up on the shifter and the bike will shift to the next gear. You can still use the clutch with no ill effect, you just don't have to. This includes a new Flash Tune shift sensor, the appropriate rods , and the harness that plugs into the sensor and connects to the bikes tip over sensor harness. This will include full detailed instructions with pictures.
now available for all year FZ/FJ and XSR
Shift rods must be trimmed to match total length of stock shift rod, See garage for directions
Push sensor for standard shift pattern FZ09, 1 down 5 up
Pull sensor for GPor reverse shift pattern FZ09, 1 up 5 down