2014-2018 FZ/FJ-09/XSR900 Flash, You specify every setting
If you do not have a good understanding of what each option is I recommend you use the other flash and send me a note
Get the best flash available!! Our flash will transform your fz/fj/xsr into the bike YOU want!!
What separates our flash from the competition?? The fact that we will work with you to get your bike set up the way you want. Not what someone else decides for you!!
Let us know what your goals are and what kind of riding you do and we will make it happen.
NO ONE will work harder to make you happy both before and after the flash.
Please choose options to suit your motorcycle in the contact form below then add item to cart and proceed to checkout
if you do not wish to use PayPal or a CC you may skip the checkout and send your ecu with a cashiers check or money order including return shipping fees to:
Flashed by vcyclenut ,9800 health park circle unit 104, Fort Myers, FL, 33908.
return shipping fees are selected and payed for on checkout
Please send it delivery confirmation not signature. My mailbox is locked, if you send it signature confirmation it may delay shipping by one business day.
Lifetime reflashes are included in original purchase to original purchaser. Shipping fees still apply
Speed limiter removal is standard and done on all flashes
O2 sensor disable is not available on the XSR
The 2017 FZ09 AIS disable is not available, but without the flash you will get a check engine light if you unplug the AIS from the main bike harness
6mm swingarms spools
Hard black anodized with quality stainless hardware. Nice lip so the stand doesn't slip off work to protect the swingarm in a crash also
FTECU Active tune
When ordered with the flash I will activate active tune and set it all up so you just have to install and enjoy
If ordered by itself you will get the kit mailed to you. Note: You still must flash your ecu
Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements.
The breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.
– Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
– Smog block-offs or disabled AIS valveThis kit includes:
– 1 FTECU YAM-01 Lambda Controller
– 1 Bosch LSU4.9 wideband O2 sensor
– 1 Product Activation Card
Currently available models
– 2017+ R6
– 2015+ R1M / R1 / R1s
– 2016+ FZ-10
– 2016+ MT-10
– 2014+ FZ-09
– 2014+ MT-09
– 2014+ FJ-09
– 2016+ XSR900
– 2015+ FZ-07
– 2015+ MT-07
Sprint Filter P08 FZ-09 / MT-09 (14-18) FJ-09 (15-18) XSR900 (16-18)
- Innovative polyester material allows for consistent airflow
- Optimized filter surface area provides more airflow, more power and more filtration
- Increased air permeability and filtration efficiency when compared to cotton air filters
- Race proven performance in organizations like MotoGP and Moto3
- Can be cleaned using only compressed air
- Dry filter, no oil treatments required
- Direct OEM replacement
- 1 year warranty
About Sprint Filter: Established in 1952, Sprint Filter started building high performance air filters and intake systems. Ever since their inception products have always been highly innovative and based on ongoing research and development of new filtering fabrics and intake systems.
Innovative Material: The Sprint Filter P08 has completely reinvented the concept of an aftermarket air filter. The innovative polyester material that is used allows the air to remain constant and calibrated unlike cotton or sponge materials that become inconsistent under pressure. A Sprint Filter is totally different from all others and its membrane filtering surface is double that of any other filter.
Race Proven Performance: Sprint Filter has been a part of World Championships in MotoGP, Moto3, Superbike, Supersport, and Superstock. The P08 filter is the first choice of championship contenders. Research and development is constantly carried out at the highest levels of racing in search of maximum filtration without compromising power.
Low Maintenance: The Sprint Filter P08 is essentially maintenance free. Remove the filter and blow it clean with compressed air and you’re ready to go. No messy oiling or washing required.
Long Lasting: If cared for properly, the Sprint Filter P08 will last for the entire time you own your bike.
Increased Fuel Economy: By optimizing the air/fuel mixture the Sprint Filter P08 allows you to consume less fuel all the while gaining more power!
Research and Development: We spend a tremendous amount of time and effort researching the best materials to use for the production of our air filters. The air filters are made with extreme precision to make sure you get the best air/fuel ratio for making power.
Efficient Filtration: The innovative polyester Sprint Filter P08 air filter stands apart from all other special cotton air filters for its increased air permeability along with its more efficient filtration and easy maintenance. The increase in air permeability and better performance in comparison with common cotton air filters is mainly due to two essential elements: the filtering material structure is made of polyester and the filter's folds are higher. These folds are what allow for the highest filtering surface on panel filters (20 mm) and work to the fullest advantage of air permeability and the quality of dirt filtration. Moreover, the total absence of oil to contain dirt allows for increased air entry with equal surface area. Furthermore, when considering that the filtering surface is very wide, an increase in airflow of approximately 25% is obtained in comparison with a cotton filter, working to the fullest advantage of the engines performance and the guaranteed protection of increased filtration.
Besides its increased air permeability, Sprint Filters P08 ensures extremely efficient filtration; as much as 80 microns, allowing to sieve out 93.13% of 100 micron particles versus the 76.42% of 100 micron particles trapped by cotton filters. This is made possible thanks to the special structure made of 5 micron diameter yarns which are woven together to leave room for a wide surface in which air passes freely.
- Yamaha FZ-09
- Yamaha MT-09
- Yamaha FJ-09
- Yamaha XSR900
OEM Part Number: 1RC-14451-00-00
FZ09 FJ09 XSR900 AIS block off plates
I am switching over from Graves block off plates to my own brand. My plates are CNC machined from billet aluminum and include everything needed for the install. Quality is top notch or I would not put my name on them!! I will be shipping the graves plates until I run out of stock at which time I will be shipping the vcyclenut plates
Graves Motorsports Smog Block Off Plates for the Yamaha FZ-09 / YXZ1000r. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold in pairs as a set (to complete 1 bike or side x side install).
Fitment: Yamaha FZ-09 2014-2016 / Yamaha YXZ1000r 2016/ XSR900
The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.
Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;
- 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
- 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
- 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.